随着目前市场的变化和经济的不断提升发展，开箱机已经被广泛应用于食品、药品、乳品、饮料、日化、电子等优先域。

　　自动开箱机是集取箱、成型、折盖、封底为一体的设备，它可自动完成开箱、成形、下底折叶折曲，并现时完成下部分胶带粘贴，本机将叠成纸板的箱板自动打开，箱子底部按一定程序折合，并用胶带密封后输送给装箱机的专用设备。

　　开箱机的工作原理将扁平的纸箱放在储料槽上(可储存100个纸箱)，通过吸盘将纸箱从料槽中吸出，在吸取拉出的同时将纸箱成型，再折前后及左右盖，更后完成胶带封底。整个动作为自动完成，采用P.L.C

+ 触摸显示屏控制。设有缺料提前报警，无料自动停机的安全装置。大大方便操作、管理、减少生产人员和劳动强度，是自动化规模生产必不可少的设备。

　　工作原理是将产品装箱后经输送链(带、辊)送入开箱机，并递交给输箱机构，由夹箱皮带夹住纸箱的两侧面，向前运动。前短舌经压舌架自动弯曲，后短舌在纸箱进入开箱机托辊时，有一检测讯号(光电讯号)通知打舌气缸动作，由打舌架将其折弯，同时有一讯号通知熔胶机自动喷胶。纸箱继续向前运动，左、右长舌经过导向杆自动向中间折弯，同时压箱机构皮带，同步压住纸箱左右长舌，使箱、舌、胶合在一起，完成开箱整形动作，即产品包装的更后一道工序-自动开箱。

　　一个完整的自动化开箱机械它是有许多部件组成的，其中更重要的组成部分是臂端操作工具、材料运送装置和识别验证系统。材料运送及处理装置是在传动和制造过程中，为产品的输送、储运和控制时自动移动所需要的某些类型的设备，由动力传送带、单轨吊车、自动导向车和机械手等组成，我们将包装产品放到材料输送装置上，此装置就可以将产品运送到臂端操作工具进行产品的包装过程。

With the change of the current market and the continuous development of the economy, the box opener has been widely used in food, medicine, dairy, beverage, daily chemical, electronic and other fields.

Out of the machine is set to take cases, forming, fold the cover, back cover for the integration of equipment, it can automatically perform unpacking, forming, under the bottom of the flex, and now to complete the part of the tape paste, the machine will automatically open the folded cardboard box board, according to certain procedures or at the bottom of the box, then tape sealing after delivery to special equipment for packing machine.

The working principle of the unpacking machine firstly put the flat carton on the material storage tank (100 cartons can be stored), suck the carton out of the material tank through the suction cup, shape the carton at the same time when drawing out, then fold the cover before and after, and finally complete the sealing of the tape. The whole action is completed automatically, using P.L.C

+ touch screen control. It is equipped with a safety device which can alarm in advance for lack of material and stop automatically when there is no material. Greatly convenient operation, management, reduce production personnel and labor intensity, is an essential equipment for automatic scale production.

The working principle is to send the product into the unpacking machine through the conveyor chain (belt, roller) and submit it to the transportation mechanism. The belt clamps the two sides of the carton and moves forward. The front short tongue is automatically bent by the pressure tongue frame. When the back short tongue enters the roller of the unpacking machine, there is a detection signal (photoelectric signal) to inform the action of the tongue-beating cylinder, which can be bent by the tongue-beating frame. At the same time, there is a signal to inform the glue melting machine to spray glue automatically. The carton continues to move forward, and the left and right long tongue will be automatically bent to the middle through the guide rod. Meanwhile, the belt of the pressing mechanism will simultaneously press the left and right long tongue of the carton to make the box, tongue and glue together to complete the unpacking operation, namely the last procedure of product packaging -- automatic unpacking.

A complete automated unpacking machine consists of many components, the most important of which are the arm end operating tools, material delivery devices and identification and verification systems. Material transporting and handling device is in the process of transmission and manufacture, for transmission, storage and transportation of the product and control automatically when the move needed for certain types of equipment, by power conveyor, hoist, automatic guided vehicles and robots, we will be packaging products on material conveying device, this device will be able to ship products to arm end operation tools for product packaging process.